Double Block and Bleed Valves

- Minimum Order Quantity
- 10 Piece
- Price
- 20000 INR
- Application
- Industrial
- Size
- 1/2 - 2 Inches
- Type
- Double Block Bleed Valve
Double Block & Bleed Valves
At YDB Valves, we engineer high quality double block and bleed valves customized to match process requirements. All double block and bleed valves at YDB valves are manufactured under control of ISO 9001 to ensure process integrity.
Why YDB Double Block and Bleed Valves Are Preferred by Customers?
Double block and bleed (DBB) valves provide a single valve that can simultaneously cut off/isolate the downstream and upstream systems. In the block and bleed configuration, needle valves or ball valves are used as drain valves or bleed valves while ball valves are used as isolation or block valves.
Double block and bleed valves provide positive shut-off and zero leakage which makes them ideal for product metering, product isolation, aviation fueling, blending, tagout/lockout, tank storage, product manifolds and other applications.
Double block and bleed valves are designed and manufactured according to API 6D/6A, ASME B16.34, NACE MR0175, API 598, API 607 and API 6FA. Each double block and bleed valve is 100% factory tested and approved for use in industrial and commercial applications.
In order to specify a double block and bleed valve, you must have an understanding of your outcome. Selecting the valves for your project can be challenging. YDB valves can help you choose the right valve for your application.
Advantages of Double Block and Bleed Valves
Double block and bleed valves are ideal for critical processes and widely used for hazardous fluids and high pressure systems. Applications where double block and bleed valves and double block and bleed ball valves are used include gauge isolation, chemical seal isolation, chemical injection connection, chemical instrument isolation, direct mounting of instruments, sample connection, gauge isolation remote mounting of instruments and instrumentation drain.
Double block and bleed valves reduce costs of installation and allow fewer potential paths for leakage compared to traditional valve installations. Double block and bleed valves complete the work that would normally require three separate valves - one drain and two isolation - which means that less space is required for them. Some other advantages of installing double block and bleed valves are:
- Reduced bolting and gasket
- Reduced system vibrations
- Supporting brackets aren't required
- Design becomes more compact
- Increased system reliability
- Improved personnel and plant safety
Design Range
Pressure Class :
- YDB double block and bleed valves can handle pressure up to 10000 psi.
- Class 150 to 2500
Double Block and Bleed Valves Catalogue
We offer several configurations in our double block and bleed valves. Some of our double block and bleed valves are:
- Double Block and Bleed Ball Valves
- Double Block and Bleed Needle Valves
- Integral Block and Bleed Valves
Double-Block-and-Bleed-Valves
Features :
- Compact ball valve/needle valve and OS&Y assembly in one DBB.
- Working pressure up to 10,000 Psig (690 Bar).
- Every valve is subject to a pressure test in accordance with the standard API 598 or BS 6755 part 1.
- NPT Threaded connection to ANSI/ASME B1.20.1.
- Pressure rating as per ASME B16.34 Class 150 thru 2500.
- Anti-Static device is set between the stem and ball.
- Fire tested as per BS6755 part 2/API 607.
- Wetted components of sour gas service valve are selected as per requirements of NACE MR01-75/ISO 15156.
- Flange construction as per the requirement of ASME B16.5. Flange connections comply with EN 1092-1 are also available upon request.
- Reduced potential leak paths with primary & secondary isolation in one valve.
Ordering Information :
BV05 - Ball Valve Series 05
A. Valve Series
- 05 - Single Piece Forged Body
- 10FB - Three Piece Bolted Body Full Bore
- 10RB - Three Piece Bolted Body Reduce Bore
B. Bore Size
Designator |
Size |
1 |
9.5 mm (3/8") |
2 |
14 mm (1/2") |
3 |
19 mm (3/4") |
4 |
25 mm (1") |
5 |
38 mm (1 ÃÆÃâÃâ ââ¬â¢ÃÆÃ¢Ã¢ââ¬Å¡Ã¬Ãâ¦ÃÂ¡ÃÆÃââââÂ¬Ã Â¡ÃÆÃ¢â¬Å¡Ãâý") |
6 |
42 mm (1- 11/16") |
7 |
50 mm (2") |
C. Seats, Body Seals, Stem seal
- D - PEEK, Graphite, PTFE
- E - PEEK, PTFE, PTFE
- F - PEEK, VITON, PTFE
D. Process Connection Flange Size
Designator |
Size |
8 |
1/2 |
12 |
3/4 |
16 |
1 |
24 |
1-1/2 |
32 |
2 |
48 |
3 |
E. ASME Class Rating
Flange Class
Designator |
Class Rating |
150 |
150 |
300 |
300 |
600 |
600 |
900 |
900 |
1500 |
1500 |
2500 |
2500 |
F. Process Inlet Connection Type
- A - Flange, RF Smooth
- B - Flange, Concentric Serrated
- C - Flange, RTJ
G. Outlet Connection
- 8N - 1/2 Female NPT (9.5mm & 14mm Bore Only)
- 12N - 3/4 Female NPT (9.5mm & 14mm Bore Only)
- F - Flange (Same as Process)
H. Material
- S - SS316
- C - Carbon Steel
- D - Duplex
- M - Monel
- I - Inconel
I. Bleed Connection
- 4 - 1/4" Female NPT
- 8 - 1/2" Female NPT
Ball Valve
- Needle Valve
- DBB-05 Series
- DBB-10 Series
Ball Valve - Specification
FEATURES :
- Quarter turn positive stop handle with protective sleeve.
- Micro-Finished ball for long service life.
- Anti-static design.
- Bottom loaded stem prevents stem blowout and enhances system safety.
- High strength stem bearing provides smooth actuation and eliminates galling between valve stem and body.
- Pressure rating upto 10,000 psig (690 Bar).
- Temperature rating upto -65oF to 450oF (-54oC to 232oC)
Material of construction:
No. |
Component |
Material of Constructions |
|||
SS316 SS316L |
Carbon steel A105 |
Duplex |
Inconel 625 |
||
1. |
Body |
SS316 SS316L |
Carbon steel A105 |
Duplex |
Inconel 625 |
2. |
End connector |
SS316 SS316L |
Carbon steel A105 |
Duplex |
Inconel 625 |
3. |
Ball |
SS316 SS316L |
SS316 SS316L |
Duplex |
Inconel 625 |
4. |
Stem |
SS316 SS316L |
SS316 SS316L |
Duplex |
Inconel 625 |
5. |
Seat retainer |
SS316 SS316L |
SS316 SS316L |
Duplex |
Inconel 625 |
6. |
Handle & stop pin |
|
SS304 |
|
|
7. |
Lock nut |
|
SS316 |
|
|
8. |
Disc spring |
|
Inconel X750 |
|
|
9. |
Stem packing |
|
PTFE Graphite |
|
|
10. |
Stem bearing |
|
PTFE |
|
|
11. |
Seat |
|
PTFE Peek |
|
|
12. |
Retainer O'ring |
|
Viton |
|
|
13. |
Gasket |
|
PTFE |
|
Needle Valve - Specification
Needle-Valve-Model
FEATURES :
- Standard non-rotating free swivel stem tip.
- Upper stem thread lubricant is isolated from system fluid.
- Non-rotating lower stem avoid galling damage to the seat and tip, as well as reduces the total friction area between the packing and lower stem.
- Back seating design provides secondary stem sealing and prevents stem blowout.
- Adjustable gland flange allows packing adjustment.
- Stem packing below thread design prevent media contamination and thread lubrication washout.
- Pressure rating upto 10,000 psig (690 Bar)
- Temperature rating are as follows:
- PTFE: -65oF to 450oF (-54oC to 232oC)
- Graphite: -65oF to 1200oF (-54oC to 649oC)
Material of construction :
No. |
Component |
Material of Constructions |
|||
SS316 SS316L |
Carbon steel A105 |
Duplex |
Inconel 625 |
|
|
1. |
Body |
SS316 SS316L |
Carbon steel A105 |
Duplex |
Inconel 625 |
2. |
Lower Bonnet |
SS316 SS316L |
Carbon steel A105 |
Duplex |
Inconel 625 |
3. |
Packing Bolt |
SS316 SS316L |
Carbon steel A105 |
Duplex |
Inconel 625 |
4. |
Stem Tip |
SS316 SS316L |
SS316 SS316L |
Duplex |
Inconel 625 |
5. |
Stem |
SS316 SS316L |
SS316 SS316L |
Duplex |
Inconel 625 |
6. |
Washer |
SS316 SS316L |
SS316 SS316L |
Duplex |
Inconel 625 |
7. |
Handle |
|
SS316 |
|
|
8. |
Lock Nut |
|
SS316 |
|
|
9. |
Locking pin |
|
SS316 |
|
|
10. |
Cap |
|
PVC |
|
|
11. |
Screw |
|
SS 316 |
|
|
12. |
Packing |
|
PTFE Graphite |
|
|
DBB-05 SERIES
- 14mm BORE
- Single Piece Forged
- Raised Face (RF) Flange Process Connections.
- To 1/2in. Female NPT Outlet Connections.
- For 9.5 And 14mm Bore Sizes
- Raised Face (RF) Flange Process
- And Outlet Connections All Bore Sizes.
- DBB-05-Series-9-5mm-bore
SIZE |
CLASS |
DIMENSION |
FLANGE |
FLANGE/NPT |
||||
A(RF) |
A(RTJ) |
A(FLANGE/NPT) |
B |
C |
||||
1 |
150 |
231 |
231 |
197 |
108 |
79.2 |
7.7 |
3.9 |
300 |
241 |
241 |
197 |
124 |
88.9 |
8.8 |
4.3 |
|
600 |
241 |
241 |
203 |
124 |
88.9 |
8.8 |
4.5 |
|
900/1500 |
261 |
261 |
203 |
149.3 |
101.6 |
12.7 |
6.8 |
|
2500 |
273 |
273 |
203 |
158.8 |
108 |
16.5 |
8.1 |
|
1-1/2 |
150 |
241 |
241 |
207 |
127 |
98.6 |
9.1 |
4.9 |
300 |
251 |
251 |
207 |
155.4 |
114.3 |
12.3 |
6.4 |
|
600 |
251 |
251 |
215 |
155.4 |
114.3 |
12.3 |
6.9 |
|
900/1500 |
291 |
291 |
215 |
177.8 |
123.9 |
17.7 |
9.8 |
|
2500 |
316 |
316 |
220 |
203.2 |
146.1 |
27 |
14 |
|
2 |
150 |
241 |
213 |
210 |
152.4 |
120.7 |
10.9 |
5.9 |
300 |
261 |
241 |
210 |
165.1 |
127 |
14.1 |
7.5 |
|
600 |
261 |
261 |
220 |
165.1 |
127 |
14.1 |
8.4 |
|
900/1500 |
306 |
306 |
220 |
215.9 |
165.1 |
26.6 |
14 |
|
2500 |
346 |
346 |
230 |
235 |
171.5 |
37.8 |
22.1 |
|
DIMENSIONS ARE FOR REFERENCE ONLY AND ARE SUBJECT TO CHANGE
DBB-05 SERIES
9.5mm Bore |
14mm Bore |
19mm Bore |
DBB-10 SERIES FULL BORE (FB)
THREE PIECE, BOLTED BODY.
RAISED FACE (RF) OR RTJ FLANGE PROCESS AND OUTLET CONNECTIONS.
DBB-10-Series-Full-Bore
SIZE |
BORE (MM) |
CLASS |
DIMENSION |
WEIGHT(KG) |
|||
A(RF) |
A(RTJ) |
B |
C |
||||
1/2 |
|
150 |
235 |
248 |
88.9 |
60.5 |
8.5 |
|
300 |
241 |
254 |
95.2 |
66.5 |
9.5 |
|
14 |
600 |
254 |
254 |
95.2 |
66.5 |
10 |
|
|
900/1500 |
287 |
287 |
120.6 |
82.5 |
13 |
|
|
2500 |
303 |
303 |
133.4 |
88.5 |
16 |
|
3/4 |
|
150 |
264 |
277 |
98.6 |
69.9 |
9.5 |
|
300 |
277 |
290 |
117.3 |
82.5 |
10.5 |
|
19 |
600 |
290 |
290 |
117.3 |
82.5 |
11 |
|
|
900/1500 |
320 |
320 |
130 |
88.9 |
16 |
|
|
2500 |
333 |
333 |
139.7 |
95.3 |
19 |
|
1 |
|
150 |
272 |
285 |
108 |
79.2 |
15 |
|
300 |
279 |
292 |
124 |
88.9 |
16.7 |
|
25 |
600 |
292 |
292 |
124 |
88.9 |
17.5 |
|
|
900/1500 |
364 |
364 |
149.3 |
101.6 |
21.2 |
|
|
2500 |
377 |
377 |
158.8 |
108 |
24.2 |
|
1-1/2 |
|
150 |
361 |
374 |
127 |
98.6 |
24.7 |
|
300 |
367 |
384 |
155.4 |
114.3 |
27.1 |
|
38 |
600 |
384 |
384 |
155.4 |
114.3 |
27.9 |
|
|
900/1500 |
402 |
402 |
177.8 |
123.9 |
35.1 |
|
|
2500 |
463 |
466 |
203.2 |
146.1 |
45.5 |
|
2 |
|
150 |
390 |
403 |
152.4 |
120.7 |
48.2 |
|
300 |
398 |
411 |
165.1 |
127 |
50.3 |
|
50 |
600 |
416 |
419 |
165.1 |
127 |
51.1 |
|
|
900/1500 |
481 |
484 |
215.9 |
165.1 |
66.8 |
|
42 |
2500 |
652 |
655 |
235 |
171.5 |
150 |
|
DBB-10 SERIES:
- Full Bore (FB)
- Reduce Bore (RB)
- Payment Terms
- Cash in Advance (CID), Cash Advance (CA)
- Supply Ability
- 10 Piece Pieces Per Day
- Delivery Time
- 1 Week
- Packaging Details
- Carton Box
- Main Export Market(s)
- Australia, South America, Western Europe, Middle East, Africa, Central America, Asia, Eastern Europe, North America
- Main Domestic Market
- All India